WN00-XXXX - (36.x)

Wireless Network Connector

Product number	Product type
WN00-XXXX	Wireless Network Connector

Release history

Firmware releases are optional for devices not listed in “New or updated devices”.

Release	Key features36.	New or updated devices	Type *
36.40	Add support for BayTech MMP-10 PDU. Limited to outlet readings	BayTech MMP-10 PDU	Required
36.38	Support older firmware versions of ST CLI. Resolve issue where readings are not sent due to a CLI response with the wrong floating-point resolution.	Server Tech PDUs	Required
36.36	Add reporting of breaker status
36.34	Add support for 48 outlet PDUs Fix issue in RF Code support
36.32	Add support for Server Tech serial with RF Code protocol
36.30	Enhance support for Server Tech CLI 8.0X by auto-configuring CLI password when password change required
36.28	Add support for Server Tech CLI 8.0X
36.26	Fixed enLOGIC PDU issue	Vent enLOGIC PDU	Required
36.24	Add support for new devices	Vent enLOGIC PDU	Required
36.22	Add support for new devices	APC AP8653 Veris H740 Veris E30	Required
36.20	Add support for Janitza UMG 96RM power meter Add support for Sage Paramount mass flow gas meter	Janitza UMG 96RM power meter Sage Paramount mass flow gas meter	Required
36.18	Add support for Austin Hughes PDU using IP Dongle	Austin Hughes PDU using IP Dongle	Required
36.14	Add support for Liebert (Vertiv) MPH PDU with RPC2 module	Liebert MPH PDU with RPC2 module	Required
36.12	Add support for RLE LDRA6 multi-zone leak detection controllers	RLE LDRA6 multi-zone leak detection controller	Required
36.10	Add support for Geist IMD-3 PDUs Add outlet-level reporting for ServerTech PRO2 PDUs Add outlet-level reporting for Geist IMD-2 PDUs Add reporting for desired source and actual source for APC ATSs Add support for Schneider PM5XXX power meters	Geist IMD-3 PDU ServerTech PRO2 PDU Geist IMD-2 PDU APC AP77XX ATS Schneider PM5XXX power meter	Required
36.8	Add support for ServerTech PRO2 PDUs	ServerTech PRO2 PDU	Required
36.4	Add support for APC single-phase PDUs (AP78XX) Add support for APC three-phase PDUs (AP88XX)	APC AP78XX PDU (single phase) APC AP88XX PDU (three phase)	Required
36.2	Initial production release Add support for Geist IMD-2 PDUs Add support for APC three-phase PDUs (AP78XX and AP79XX) Add support for APC AP77XX ATSs	Geist IMD-2 PDU APC AP78XX PDU and AP79XX PDU (both three phase) APC AP77XX ATS	Required

WNC firmware releases impact different non-Packet Power devices. Review the key features and devices impacted prior to determining whether or not the firmware release impacts your Wireless Network Connector(s) and the devices connected.